- X
- 0.00
- Y
- 0.00
- Deadzone
- 0.08
- Drift
- —
- Status
- Waiting
- Coverage
- 0%
Additional checks · USB
Touchpad and sensors require USB and WebHID permission. Unavailable features are not defects.
DualSense quick test
Move the sticks and press the buttons.
L1
L2
R1
R2
Sticks
- X
- 0.00
- Y
- 0.00
- Deadzone
- 0.08
- Drift
- —
- Status
- Waiting
- Coverage
- 0%
Check the controller haptic feedback.
Your stick and button test summary will appear here.
This is a browser check, not a final service diagnosis. “Not tested” and “Unavailable” do not mean a fault.
Learn about Stick Drift repairResting deviation
Leave both sticks untouched for 3 seconds. We measure without compensating for or hiding deviation.
Connect the controller and press a button.
Left stick · blue / right stick · pink. The chart shows distance from the centre over time.
Left stick
- Mean deviation
- —
- Variation around rest
- —
- Largest deviation
- —
Right stick
- Mean deviation
- —
- Variation around rest
- —
- Largest deviation
- —
A small deviation does not necessarily mean a fault. Game settings and deadzone matter. The displayed thresholds are indicative.
Button repeatability
Optional: press and release a chosen button 5 times. We count only complete presses and releases observed by the browser.
A missing press does not prove a fault. Compare the count with your own presses; very short signals may be missed.
Button not responding? See button repairL2 / R2 smoothness
Slowly press each trigger fully, then release it completely. The check needs full travel, a return and at least 5 observed levels.
L2 Not tested
- Maximum reached
- —
- Full presses and releases
- —
- Observed levels
- —
- Largest observed step
- —
R2 Not tested
- Maximum reached
- —
- Full presses and releases
- —
- Observed levels
- —
- Largest observed step
- —
The chart is indicative: a jump may come from a fast press or browser sampling, not necessarily a fault.
Technical data
Controller information
Advanced diagnostics
Model, firmware, battery, USB stability, touchpad and motion sensors. This mode is read-only and does not modify the controller. For accurate results, keep only the controller being tested connected.
Test completeness
Every input exposed by the browser.
- Tested buttons
- L2 / R2 peaks
- 0% / 0%
- Stick coverage
- 0% / 0%
- Circularity
- —
USB stability
Move the cable gently for 5 seconds while interruptions are monitored.
- Input reports
- 0
- Frequency
- —
- Largest pause
- —
- Status
- Not started
Touchpad
Movement, two fingers and physical click.
Motion sensors
Gyroscope and accelerometer on X/Y/Z.
Works with genuine DualSense controllers. Connect by USB cable or Bluetooth. All values are displayed in real time in the browser. If the test detects a persistent offset, see PS5 DualSense Stick Drift repair in Varna.